Basic Info.
Usage
Industrial use, Light Curing
Specification
Customizable, H7, 25
Transport Package
UV Lamp in Plywood Case
Product Description
| UV light solid lamp | Product name: | Ultraviolet UV light lamp |
| brand: | VIPUV |
| main peak: | 365mm |
| Warranty time: | 1000 hours |
| Product parameters | material: | High quality Shi Yingcai tube |
| use: | Ultraviolet UV curing |
Matters needing attention
1,When using must cooperate with the corresponding specifications of the transformer and capacitor 2,Ethyl alcohol surface of tube must be clean, it is strictly prohibited to directly touch by hand
3,Tubes produced by high pressure mercury vapor discharge strong long wave violet radiation (the main line is 365 nm)
4,Strong ultraviolet ray can burn the eyes and skin, use should be avoided in the light of direct illuminate 5,Accident broken tubes, which leads to the mercury vapor distribution, field personnel must leave immediately, make the scene last 20 to 30 minutes, to prevent the mercury vapour being sucked into the body and cause poisoning; Security to clear in time of the scene, when mercury recycled materials can be reserved for the use (if tubes burst inside the sealing of the UV curing machine, fan ventilation cooling for lampshade, can play to the role of outdoor drainage, so generally do not have harm to the UV machine operator)
| power | power supply voltage | total length |
| 150-400W | 220V | 117,140,165,210,230 |
| 1KW | 220V | 165,210,230,270,300,330,360,400 |
| 2KW | 220V/380V | 165,210,230,355,400,460,500,550 |
| 3KW | 220V/380V | 360,400,460,500,550,620,650,725,750,830 |
| 5.6KW | 380V | 360,400,460,500,550,620,725,750,778,800,830,900,950,1020,1050,1150,1280,1387 |
| 8KW | 380V | 900,950,1020,1050,1130,1150,1280,1387 |
| 9KW | 380V | 850,950,1020,1050,1287,1387 |
| 9.6KW | 380V | 1050,1100,1135,1200,1230,1280,1320,1387 |
| 11KW | 380V | 1300,1135,1150,1575 |
| 12KW | 380V | 1050,1100,1135,1150,1200,1280,1387 |
Above is a commonly used length of tube length, other length please contact customer service Free hotline: 400-800-3028
| fault phenomenon | why | Processing method |
| Tube surface hair black hair white | No clean tube surface during installation | Clean surface of tube |
| Fog is UV lamp produced | If there is a fog is outside the tubes is:
UV there UV light source gas
Attached to the tube wall and the volatiles
can be wiped with alcohol solvent such as
on a regular basis | Clean surface of tube |
| Lamp black | Working long hours | Try not to work long hours |
| UV lamp deformation | Temperature is exorbitant, slight
deformation does not affect the
normal use | Increase the air cooling system |
UV lamp is not bright,or the extinguished lamp
brightness is too high | UV lamp aging | Replace the UV lamp dredge duct |
| Air cooled enough | Clean the fan rotor sundry |
| The power supply voltage is lower than 10% | To improve the voltage |
| | |
| Whether the transformer matching | |
| Lamp working current is big, make the transformer overload running | Measurement in lamp or transformer Check the capacitor |
| Capacitance is punctured | Replace the capacitance |
| UV lamp brightness | UV lamp aging | Replace the bulb |
| Lamp power density is small | Replace the high power UV lamp |
| Light and object distance too far | Improve the environmental
temperature Adjust the distance start
using the new lamp |
| New tubes start not bright or flash | Low light tube voltage and transformer do not match | The measuring tube power and the related parameters, increase the voltage |
| Fried tube | Lamp working current is too high | To select the correct voltage |
| Lamp surface of dirt or dirt on the high temperature splash | Tube surface clean |
| Virtual connect | Good to meet |
| short circuit | Test tubes while the iron is hot |
| UV curing coating incomplete or complete | Lamp power density is small | Replace the high power UV lamp |
| UV coating light initiator | In the UV coating |
| Low temperature curing time is short, or the environment | Longer cure time |
| Light and object distance too far | Improve the environmental
temperature Adjust the distance |
Address:
3rd Floor, Building C, Kangpeng Technology Park, Zhuyuan Road, Liaobu Town, Dongguan, Guangdong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Lights & Lighting, Manufacturing & Processing Machinery
Company Introduction:
Our company supplies different kinds of products. High quality and favorable price. We′re pleased to get your Inquiry and we will come back to as soon as possible. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with good quality at the reasonable price.
